膠管的種類很多，材質不同，環境也不同。事實上，滴膠管的使用時間除了與質量有關外，還與很多因素有關。比如保養和使用條件，即使它的質量很好，在使用的時候如果不小心，也會降低它的使用壽命。以下是使用

There are many types of rubber hoses, with different materials and environments. In fact, the usage time of drip hoses is not only related to quality, but also to many factors. For example, maintenance and usage conditions, even if its quality is good, if not careful during use, it will reduce its service life. The following is the use of

彩鋼滴膠管時應注意的幾個方面。

Several aspects to pay attention to when using color steel drip hoses.

一、軟管的長度很重要，因?yàn)檫@關系到它所承受的壓力，不能超過壓力范圍。不能用它來輸送不能輸送的物料會影響它的使用壽命。滴膠管的長度一定要正確使用，不能超過這個長度范圍。

1、 The length of the hose is important because it is related to the pressure it bears and cannot exceed the pressure range. It cannot be used to transport materials that cannot be conveyed, which will affect its service life. The length of the drip hose must be used correctly and cannot exceed this length range.

二、對它輸送的介質的溫度也有要求，不能低于40度，也不能高于120度，否則會損壞滴膠管，降低其使用時間。它的較小彎曲半徑不可能小于這個范圍。如果再小一點，就不能用了，在彩鋼復合板接合處也不能彎曲。否則液壓傳動不順暢，物料輸送不順暢。

2、 There are also requirements for the temperature of the medium it transports, which cannot be lower than 40 degrees or higher than 120 degrees, otherwise it will damage the drip hose and reduce its service time. Its smaller bending radius cannot be smaller than this range. If it's a little smaller, it won't work and won't bend at the joint of the color steel composite board. Otherwise, hydraulic transmission will not be smooth and material transportation will not be smooth.

三、不要在扭結的情況下使用彩鋼復合板滴膠管，搬運時要小心，避免尖銳刺破，也不要在粗糙的接口上硬拽，不要過度彎曲或壓平。定期清潔，避免雜物堵塞彩鋼復合板的清潔，特別是一些關鍵的地方，要經常清潔，防止雜物進入其中，阻礙液體的暢通，損壞設備。膠水使用滴膠管需要注意的事項，我們一定要按標準操作。

3、 Do not use the color steel composite plate drip hose in twisted situations. Be careful when handling to avoid sharp punctures, and do not forcefully pull on rough interfaces. Do not excessively bend or flatten. Regularly clean to prevent debris from blocking the cleaning of color steel composite panels, especially in key areas. It is important to clean regularly to prevent debris from entering, hindering the flow of liquids, and damaging equipment. The precautions to be taken when using a dropper for glue are that we must follow the standard operation.